Lift system for bed

This lifting system for beds consists of a pair of articulated brackets for lifting beds with shock absorbers. They are compatible with practically all types of metal or wooden bed frames. The application is done with screws on the metal or wooden base, supplied with the set. Fastening to the sides of the bed is carried out using compass nuts for wood where the M6 screws will be tightened.

All the screws required for your application are provided with the system, as well as the instructions that you can also download on this page.

We also recommend applying 1 or 2 beacons to the head of the bed, depending on the width of the bed, to prevent the mattress from slipping once opened.

Available with different shock pressure powers, according to the shock pressure guide table and mattress size.

The shock absorbers will be supplied in black or gray depending on stock availability.

Care to take into account

You should not close/lower the bed frame without having placed the mattress. The shock absorbers exert very strong and localized pressure; if you exert too much pressure, the platform can bend and/or break. You should only do this with the mattress in place, the mattress distributes the weight evenly across the platform helping to distribute the pressure!

Pressure shock absorbers:

Comments!

1. These indications refer to the total weight of the mattress with clothes and are merely indicative
2. In case of exchange for reasons not attributable to J. CARDOSO Móveis, the shipping / return costs are at the customer's expense.

ATTENTION! All shock absorbers are under pressure. For safety reasons do not disassemble the shock absorbers, risk of injury!lifting beds!